MHL A48
- MHL SERIES – Maximum Capacity Flow (SCFM, -40°F PDP)
- Connection: 6 in Flg
Capacities
MHL SERIES – Maximum Capacity Flow (SCFM, -40°F PDP)
| Model | 80 PSIG | 90 PSIG | 100 PSIG | 110 PSIG | 120 PSIG | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| MHL- | 100°F | 120°F | 100°F | 120°F | 100°F | 120°F | 100°F | 120°F | 100°F | 120°F |
| A48 | 4211 | 4066 | 4655 | 4495 | 5100 | 4924 | 5545 | 5353 | 5989 | 5783 |
Dimensions
Connection: 6 in Flg
Width: 140 in
Depth: 60 in
Height: 118 in
Weight: 9500 lbs
Electrical
Volts/Phase: 120/1
Hz: 60
MHL A48
Standard Features:
- -40°F line pressure dewpoint
- ASME Code desiccant vessels
- NEMA 10 minute cycle, fully automatic operation
- Adjustable timer cycle for lower dewpoints*
- Fail safe operation. Continuous flow on loss of power or control air
- Non-lubricated valves
- Tower pressure gauges on all models
- Gradual repressurization for long desiccant life
- ASME relief valve on outlet manifold
- Full charge of desiccant
- Heavy duty angle and channel support base*
- NEMA 4 electrical construction
- Cycle Failure Alarm*
- 120V/1Ph/60Hz operation – 200w max
- On-Off Switch with Power On light*
- LED pilot lights
*Floor mounted models
Optional Features:
- -70°F to 100°F line pressure dewpoint
- Purge Rate Flowmeter – included on larger models
- NEMA 4X, 7 electrics
- Entrainment Separators
- Coalescing Prefilters
- Afterfilters
- Mounted filters, manual bypasses
- Dewpoint monitors and alarms
- Color change dewpoint indicator
- Temperature gauges
- Steam jet ejector for vacuum purge
- Special designs available for flows to 30,000 SCFM and pressures to 5000 PSIG
- Construction for corrosive environments, explosive process gases, off-shore installations
- Full pneumatic controls – for hazardous locations or where electrical power is not available
- Optional voltages – 12 or 24 VDC; 110-220V/50hz
- Exclusive Demand System for Heaterless Dryer